Cordless drills are powered by lithium batteries and is primarily used to drill holes in materials such as metal, wood, concrete, brick and stone. FIXTEC Tools provides certified, high-performance cordless drills at affordable prices to distributors, construction suppliers, sourcing managers, e-commerce sellers and hardware stores. Cooperating with FIXTEC Tools, you can enjoy 7-day fast delivery, professional after-sales service, technical support and promotion support.
2x1500mAh Li-ion battery
No-load speed:0-350/0-1300rpm
Clutch: 18+1+1+1 setting
2x1500mAh Li-ion battery
No-load speed:0-350/0-1300rpm
Clutch: 18+1 setting
1500mAh Li-ion battery
No-load speed:0-400/0-1400rpm
Clutch: 18+1 setting
2x2000mah Li-ion battery
No-load speed:0-400/0-1400rpm
Clutch: 21+1setting
2x2000mah Li-ion battery
No load speed:0-400/0-1600rpm
Cluth style: 20+1+1+1
13mm metal keyles chuck
1x1500mah Li-ion battery
No load speed:0-350/0-1400rpm
Cluth style: 20+1
10mm keyless chuck
1x1500mah Li-ion battery
No-load speed:0-400/0-1400rpm
Cluth style: 20+1
10mm keyless chuck
2x1500mAh Li-ion battery
No-load speed:0-350/0-1400rpm
Cluth style: 20+1
10mm keyless chuck
2x2000mAh Li-ion battery
No load speed:0-500/0-1800rpm
Clutch: 20+1 setting
13mm metal chuck, 45N.m
2x2000mah Li-ion battery
No-load speed:0-400/0-1600R/min
Clutch: 20+1+1+1setting
13mm chuck
Rated Voltage:20V
No-load Speed:1900rpm
Impact Rate:0-3100bpm
Chuck Diameter:1/4″ HEX
2x4000mAh Li-ion battery
Line speed:40m/min
Max.Pulling:65Kgs
Wire reel:20m
Our cordless drills have 20+1 and 18+1 clutch settings, 20 and 18 mean there are 20 and 18 torque gears, users can choose the right torque according to different work needs, avoid over-tightening or damage to screws/materials. The last number+1 means the drilling mode, when you see 20+1+1+1 on a cordless drill, it means you can choose 20 torque gears and have a drilling mode,a hammering mode and a screw mode. With a cordless drill like 20+1+1+1, you can complete drilling projects on hard materials such as concrete and bricks, as well as wood and metal.
Our cordless drills come with two types of chucks: keyless chuck and keyed chuck. Keyless chuck means that when changing the drill bit, you can quickly clamp and release the drill bit by turning it by hand without using an additional key tool. While a keyed chuck is a drill that requires a special key(chuck wrench)to tighten or loosen the drill bit. Our keyed chucks are made of metal because metal is highly wear-resistant and suitable for long-term, heavy-duty use. If you want to save time, especially for jobs that require frequent drill bit changes, it is recommended to choose a keyless chuck as it is suitable for light work and is easier and more convenient to operate.
For daily home use,it is recommended to choose a drill bit between 1/4 inch and 3/8 inch(about 6mm to 10mm).If you need to handle larger and heavier jobs(such as drilling holes in concrete and installing outdoor steel structures),consider using a 1/2-inch(about 13mm)drill bit.
Voltage,battery capacity,weight,torque,speed,chuck type,LED light,and fast charging,all of these factors should be considered when buying a cordless drill.
As for powerful performance,corded drills are more powerful than cordless drills.Cause cordless drills using lithium batteries as power source,once the battery power is too low,the performance will decline.While corded drills connect directly to the power source,they have higher continuous power output,suitable for heavy-duty operations.
The best amperage for cordless drills depends on a number of factors,including what you're going to do with the drill,the hardness of the material,and the type of drill bit you're using.Typically,cordless drills for home and light work have amperages ranging from 20 to 50 Nm.For more professional or heavy-duty work,amperages can go up to 60 Nm and above.
+86 136 051 68946